• Contactless Click & Collect
  • Fast Shipping
  • 100% NZ Owned & Operated
  • Bulk Buying Discounts

DIN741 Wire Rope Grip

From $0.35

The DIN741 Wire Rope Grip is a heavy duty commercial grade wire rope grip made to the DIN 741 pattern, with a Dacromet coating for long lasting rust protection. It is for securing the end of a wire rope or forming an eye in general rigging. It comes in 5mm to 26mm, with the 6.5mm zinc plated.

Add to quote
SKU: N/A

Description

SKU Rope Size (mm) Finish
2417 5 Dacromet
2418 6 Dacromet
101089 6.5 Zinc plated
2419 8 Dacromet
2420 10 Dacromet
2421 13 Dacromet
2422 16 Dacromet
2423 19 Dacromet
4067 22 Dacromet
4084 26 Dacromet
  • Commercial grade wire rope grip to the DIN 741 pattern.
  • Dacromet coated (the 6.5mm is zinc plated). Dacromet is a thin, water based coating of overlapping zinc and aluminium flakes, around 5 to 7 microns thick.
  • Protects the steel four ways: a flake barrier, sacrificial zinc, passivation that slows corrosion, and zinc salts that move into scratches to repair the coating.
  • Rated to 1,000 hours of salt spray, around 3 times the corrosion protection of pure zinc.
  • No acid pickling or electroplating, so there is no risk of hydrogen embrittlement.
  • Heat and solvent resistant, and free of nickel, cadmium, lead and other toxic metals.
  • Use at least the recommended number of grips per termination, with the saddle on the live (load bearing) side of the rope.
  • Not for lifting. Wire rope grips must not be used on lifting gear, live running ropes, or to support people or suspended loads.
  • Bulk boxes of 6.5mm and 8mm are available at a discount, see the DIN741 Wire Rope Grip Bulk page.
0